For our kitchen, we bought the cabinet frames from IKEA to keep the budget under control, but opted to purchase the door fronts from a higher-end vendor called Semihandmade. I had discovered this company a year ago and was so intrigued by their business model. They design high quality, real-wood doors that exactly fit all IKEA kitchen cabinets, for clients who want an affordable kitchen from IKEA but desire a higher-end, more custom look. We opted for the DIY option, which meant they’d delivered raw, unfinished cabinet doors that we could paint whatever color we desired. This option was appealing for several reasons: 1) obviously the budget–it was the least expensive product they sell and 2) I didn’t love their color options (they only had about 10 color options that were all very neutral) and was interested in picking the PERFECT color that was just right for me.
Well let me tell you, painting these doors was a WAY greater endeavor than I could have expected. I had read blog after blog of other women who had painted the DIY cabinets themselves but no one ever mentions how time consuming it is, or how heavy these doors are! I opted to apply one layer of primer and then two layers of color. But since I could only paint one side at a time, that was essentially 6 rounds of spray painting. We decided to use a paint sprayer instead of a brush for a more even application of the paint.
We received the cabinets on November 9th, and had until December 12th when our kitchen was scheduled to be installed to finish all six rounds of spraying. We were limited to days when the weather was not windy, rainy, or snowy (since the spraying was in the back yard), and of course we had to start before 2 PM to beat the early winter sunset. We had less than 5 weeks. Could we make the deadline? We sure were going to try!
November 11: I borrowed the paint spraying gun from our trusted handyman and set to work on the first round of primer. I set up our two saw horses with 2X4s and immediately realized I would need a WAAAAAY larger staging area to paint all 37 individual pieces of wood doors, trim, and panels.
After a LOT of troubleshooting, I started the first round with primer in the sprayer. I had to get the top of each door, plus the sides. The paint sprayer was a bit fussy and sometimes shot out a large glob of paint. To avoid this, I added water to thin the primer. It took me about an hour to do all 37 pieces, and I cursed SO many times I was afraid of what the neighbors thought. But I learned a lot that first round. We brought the doors inside after a few hours to finish drying.
November 19: I did the same set-up and spray painted the other side of each door with primer. This time was a bit easier since I had already painted the edges, I only had to cover the tops of each piece this time. Plus I applied the lessons I learned in the first round: thin the primer a lot so it’s almost the consistency of whole milk; hold a paper towel below the nozzle to catch those hated paint drips; never let the canister reach near-empty levels.
November 21: I had the day before thanksgiving off of work and thankfully the weather was a sunny 48 degrees, so I hauled each piece into the back yard yet again for the first round of color application! We selected Benjamin Moore Advance Paint, which is meant for kitchen cabinets–it’s a more expensive paint but it dries extra hard for added durability and longevity. I selected the same dark blue color as our staircase wall, Champion Cobalt, so that once the kitchen is installed, the entire south wall of our home will be the same color.
November 24: On the Saturday after Thanksgiving, my aunt and uncle came over and, like champs, helped to sand down any bumps and paint drips on the doors. Unfortunately some paint dripped down the sides during my previous application and resulted in small pools of paint along the edges. Cardinal and Joanie are professional handymen on boats in Annapolis, so they arrived just when I needed them the most: Cardinal showed me how to sand down the doors while Joanie carefully sanded and cleaned them off. They also helped us move 30 sheets of plywood from the curb into our house (god bless them)!! They worked in beast mode the entire time and I could truly see the Surette genes in action (we hate to slow down and are constantly cleaning things).
Luckily, this was the FINAL application for the 2 huge pieces and the 6 long skinny pieces, since I am only painting one side of them (they will be screwed into place so we’ll never see their undersides). There are two more applications to go for all the remaining doors. Unfortunately it’s starting to get cold and windy, which means i’ll be spraying outside then quickly bringing them inside to dry for the last two rounds.
November 28: On Friday, the weather was clear and a warm 48 degrees so I took off work and sprayed the remaining cabinets that need a second coat. Unfortunately, my previous spraying technique resulted in highly annoying and ugly drips of paint that dried in small mounds on the edge of some doors. I was not a happy camper. To remove the dried paint bumps, we had to sand, sand, sand down the drips (huge shout out to my friend Elizabeth who helped with 2 hours of sanding on Thursday night!).
For this 5th round of spraying, I implemented a new technique where I sprayed 6 doors at one time (the max amount that would fit on the saw horses), then quickly used a foam brush to gently wipe the side edges of each door to remove any excess paint. Then we walked the doors inside our house and laid them out on long pieces of wood to dry overnight. This technique worked SO much better and the next day we happily discovered no cursed paint drips to sand off. Allowing them to dry inside helped avoid small pieces of grass, leaves and other natural debris from landing on the cabinets.
Friday December 7: Realizing we had less than a week left to finish the last round of painting and allow for adequate dry time, I did the last coat on Friday before leaving for a weekend away. This time I was HYPER efficient and whipped through all the doors as fast as I could. Unfortunately it was freeeeeeeezing cold and my fingers turned bright pink, but I survived and so did the doors! Huzzah!
Now that I am finally done with this gargantuan effort, I simply CAN NOT WAIT for them to be installed this week! We hired a company to install our kitchen for us because we aren’t completely insane and realized we needed help. After this painting saga, I’m not even sure if I like this color any more, but once they are installed I’m sure I will love them in all their glory!
Tips for anyone thinking about spray painting your kitchen cabinets:
- Benjamin Moore Advance paint is designed for kitchen cabinets, but you need to wait a looooooong time for it to fully dry before touching or moving it. I would recommend a full 24 hours at least–during this time do not stack the doors or allow them to touch each other.
- Try to set up 2X4s or something else for the doors to sit on as you paint and do NOT move them after they’ve been painted. We didn’t have this luxury but it would be best to keep them where they are after spraying to avoid touching the wet paint. I also noticed after I moved the doors away from the spraying area and onto a drying area that sometimes paint had dripped to the bottom where I couldn’t see it and then dried in and stuck to the surface on which it was drying (which brings me to my next point).
- Remove any excess paint from the edges of your doors immediately after spraying with a foam brush. This will avoid paint from pooling and drying in bumps along the edge of your cabinets.
- Spray paint in a garage or covered space if possible–little pieces of grass, leaves, and general nature debris would blow into my yard and get on the doors as they dried. I wish we had a covered place to spray paint but unfortunately we don’t.
- Do your cabinet painting in the spring or fall! It was probably too cold to do it in November and December, but we had not choice. Paint drys better when the temp is above 50 degrees.
- Think about where you will put your doors to dry and after they are dry to wait before installation. We moved these heavy doors around almost every room of our house two times during the last month during different phases of the entire home’s renovation, which was not fun (especially the long pieces).
Would I do this again? Not sure–it was a TON of work and I couldn’t spend that time on other renovation activities. Paying a professional would have cost a lot more but the finished product would presumably have fewer imperfections. Am I happy with the outcome? Yes, I’m feeling very accomplished and trying to embrace the small imperfections. Hopefully only I will notice them so please don’t point out any blemishes on my cabinets when you come to visit!